ModWood Flame Shield® BAL-40 Decking

Flame Shield® is a specially formulated ModWood board with a fire retardant additive included. Until now decking board options for bushfire-prone areas were limited; however, this has all changed. Flame Shield® can be used in BAL-12.5, BAL-19, BAL-29 and BAL-40 areas and gives you a traditional timber decking look and feel.

Flame Shield® is tested and certified to (AS 3959-2018). bushfire attack level from BAL-12.5 up to and including BAL-40. Flame Shield® is a specially formulated ModWood with a fire retardant additive included.

product flameshield 1

Flame Shield® has the highest BAL rating compared to other timber-based decking in the Australian marketplace. Flame Shield® can be installed with either an enclosed* or unenclosed sub-structure and is offered in all four colours of the ModWood Natural Grain Collection, wide board 137 x 23mm. Additionally; Flame Shield® also has a deep embossed pattern on the board surface to improve slip resistance and is manufactured to R11, AS 4586:2013.

Flame Shield® Burn Characteristics can be viewed within the Technical Data Sheet.

ModWood Flame Shield® Benefits

Eco-Friendly

Our Flame Shield® decking is made from up to 90% recycled and reclaimed materials.

Flexible Design 

With multiple colour options and enclosed or un-enclosed substructure installation capability, Flame Shield® allows you greater freedom and choice when it comes to designing your outdoor space.

Fire-Resistant

For areas with a BAL-12.5 to BAL-40 rating, Flame Shield® not only offers protection but peace of mind, including from an ember attack and burning debris ignited by wind-borne embers.

Australian-Made

 Launched in 2012, Flame Shield® BAL-40 decking is proudly made in Australia.

Slip-Resistant

With an R11 slip resistance rating, Flame Shield® is an ideal choice for outdoor areas such as walkways, and patios. 

Long-Lasting Decking

On top of Flame Shield®’s bushfire resistance, this product is designed to withstand the harsh Australian conditions. Offering a high-quality finish for longer life.

Flame Shield® FAQs

Does Flame Shield® require special maintenance?

No, it doesn’t. None of our composite decking requires painting, staining, or sealing — and this includes our Flame Shield® products. With just regular washes with water and mild detergent, you will be able to preserve the high-quality finish of your Flame Shield® decking.

What will happen if my Flame Shield® decking is caught in a fire?

As Flame Shield® has a BAL-40 rating, it is designed to withstand high levels of radiant heat and ember attacks. However, it is important to note that no material is completely fireproof. In the event of a fire, Flame Shield® will significantly reduce the spread of flames in comparison to traditional timber decking, and will contribute less to fires as natural wood does.

Where can I buy Flame Shield® BAL-40 decking boards?

View our full list of stockists here.

Want to learn more about ModWood Flame Shield® BAL-40 Decking?

Get in Touch

ModWood Flame Shield® BAL-40 Decking Specification Table

       Solid
Dimensions   137 x 23mm
Standard length   5.4m
Joist centres   450mm
Ground clearance
Clearance over concrete		   300mm
50mm
Weight   25kg/m2
Weight per lineal metre   3.7Kg
Fixing   screw /nail gun
Secret fixing   possible
Finish   smooth/brushed

Maximum Overhang or Cantilever with Flame Shield®                           ZERO

ModWood Flame Shield® BAL-40 Decking

Fixing Over Concrete information located at www.modwood.com.au/installation

Information for using ModWood and the KlevaKlip System can be found at the KlevaKlip website.

 

Several interesting articles are available for review at this link

Colours and finishes

Colours shown here are approximate representations only. Colours may vary from batch to batch, however different batches of the same colour will weather to within a commercially acceptable tolerance.

Sahara

Black Bean

Jarrah

Silver Gum